Add a Socket

Home/ Services/ Electrical/ Add a socket
Add a socket · Amsterdam and surroundings

Extension leads through the whole house are not an electrical problem. It is a layout problem.

Adding sockets in Amsterdam from € 145 per point including materials, labour, chasing and making good. Count what you need below and see the price straight away — the more points in one visit, the lower the rate per point.

€ 145 per point, all-in Volume discount from 6 points Handed over plaster-ready 5-year warranty
€ 145
add a single socket, everything included
−15%
from twelve points in the same visit
6 – 9
points per room in a modern home
1 dag
for a home full of added points
Point counter · 30 seconds

Count your points and see the price, including the volume discount.

Enter the quantity per type. The more points in the same visit, the lower the rate per point — call-out, isolation and testing only need to happen once.

Add a socket — single€ 145 per punt
Add a socket — double€ 165 per punt
Socket with USB-C€ 195 per punt
Relocate a socket€ 135 per punt
Replace a socket or switch€ 65 per punt
Vloercontactdoos of vloergoot€ 285 per punt
Outdoor socket IP44€ 225 per punt
Add a switch€ 65 per punt
Wisselschakeling (2 punten)€ 235 per schakeling
Fit a dimmer€ 135 each
Datapunt CAT6€ 165 per punt
Extra circuit in the meter cupboard€ 265 eerste, € 195 volgende

Why the price per point drops

Call-out, isolating the installation, recording measurements and clearing up happen once, whether we fit two points or twenty. From six points we therefore deduct ten percent, from twelve points fifteen percent.

Your indicative price
indicative price incl. VAT
Stuur mijn lijstje via WhatsApp Request a callback

Assuming an existing installation with earth and enough space in the consumer unit. Chasing in concrete or work above the third floor without a lift may differ.

VAT display
Electrical work is always charged at 21% VAT. When does 9% or 0% apply?
How much is enough

How many outlets a room actually needs, and where they belong.

1970s homes typically have two sockets per room. A modern living room needs six to nine, and that is not luxury but the sum of TV, router, lamps, chargers and a vacuum cleaner.

RuimteAanbevolenWaar preciesOften forgotten
Living room8 – 12 puntenTwee per wand, extra bij de tv en de bankBehind the sofa for a lamp; floor socket by a floating piece of furniture
Keuken6 – 8 above the worktopOne double per metre of worktopTwee bij de koffiemachine; punt in het eiland
Slaapkamer5 – 7 puntenTwo on each side of the bed, at 70 cm heightUSB-C naast het bed; punt bij de kaptafel
Werkkamer8 – 10 puntenCluster van vier bij het bureau, plus dataPoint for the printer; a data point saves Wi-Fi misery
Hal en overloop2 – 3 puntenAt the door and halfway down the hallVacuum point; point for the meter cupboard or router
Bathroom1 – 2 puntenOnly outside the zonesPoint by the mirror for a hairdryer — outside the zones
Zolder en berging3 – 4 puntenAt the stairs and by the washing machinePoint for the dryer; outdoor point by the back door
Tuin en balkon1 – 2 puntenIP44, bij de deur en achter in de tuinPoint for the robot mower or Christmas lights

De hoogte bepaalt of u ze gebruikt

Sockets usually sit 30 centimetres from the floor. That works for the vacuum, but not for a lamp beside the bed or a kettle on the worktop. Our standard heights: 30 cm along the wall, 70 cm beside the bed and at a desk, and 110 to 120 cm above a worktop. It costs nothing extra to set them at the right height, provided you say so before chasing.

What is in the price

What actually happens when we add a socket — and what the € 145 covers.

The outlet itself costs a few euros. What you pay for is the cable from the nearest junction box or consumer unit, the back box in the wall, chasing and making good, finishing and testing. In most homes that is three-quarters of an hour to an hour per point.

Waar de leiding vandaan komt

Usually tap a nearby junction box or loop from an adjacent socket. That is allowed if the circuit can take the extra load and the number of points per circuit stays within limits. We check that — there is no point hanging a tenth outlet on a circuit that then trips at the first vacuum.

Hakken of opbouw

In plaster or plasterboard recessing is simple. In solid masonry you have to chase: € 17 per metre in brick, € 24 in concrete, plus € 14 per metre to make the chase plaster-ready again. For a single point in an awkward place a neat surface trunking solution is sometimes wiser — we will say so.

What we do not do

We do not tap a circuit that is already full, we do not use an existing lighting circuit for sockets, and we do not put a socket in bathroom zones. That sounds obvious, but it is exactly what we find when someone had it done cheaply before.

Plaster-ready, not painted

We close the chases and hand over plaster-ready. Finishing and painting can be in the same project with us — and that part then falls under the reduced 9% VAT rate, because painting and plastering do, and electrical work does not.

Our standard heights
Langs de wand, algemeen30 cm
Naast het bed70 cm
Bij een bureau70 cm
Above a worktop110 – 120 cm
Switch next to the door105 cm
Outdoor socket50 – 90 cm
Distance to a door framemin. 15 cm

Do it in one go

Most people first add two points and call again half a year later. Two call-outs and two rounds of dust cost more than doing it in one visit. Walk through the house beforehand with a notepad and note where an extension lead sits now — that is your list.

Point prices · 2026

Price per point, published — including chasing and making good.

Including materials, labour, back box, chasing and making good, finishing, testing and call-out within Amsterdam.

Socket outlets
Add a socket — singleper punt€ 145
Add a socket — doubleper punt€ 165
Socket with USB-Cper punt€ 195
Relocate a socketper punt€ 135
Replace a socket or switchper punt€ 65
Vloercontactdoos of vloergootper punt€ 285
Werkbladcontactdoos, uitklapbaarper punt€ 245
Outdoor socket IP44 with its own protectionper punt€ 225
Volume discount from 6 pointson the total−10%
Staffelkorting vanaf 12 puntenon the total−15%
Switching & dimming
Fit a switch — single-poleper punt€ 65
Wisselschakeling aanleggen (2 punten)per schakeling€ 235
Kruisschakeling aanleggen (3+ punten)per schakeling€ 345
Serieschakelaar of drukknopper punt€ 85
Dimmer matched to LED loadper dimmer€ 135
Bewegingsmelder of aanwezigheidsmeldereach€ 155
Fit a smart switch or moduleeach€ 145
Afmontage designmerk — meerprijsper punt€ 18 – 65
Vlakke inbouwafmontage — meerprijsper punt€ 55
Sometimes needed
Nieuwe leiding trekken in buisper metre€ 44
Chasing in plasterper metre€ 11
Chasing in brickper metre€ 17
Chasing in concreteper metre€ 24
Close the chase, plaster-readyper metre€ 14
Leiding in kabelgoot of plint wegwerkenper metre€ 26
Mount and connect a junction boxper punt€ 130
Add a circuit als de groep vol zitper circuit€ 265
Datapunt CAT6 aanleggen en afmonterenper punt€ 165

All amounts include materials, labour and 21% VAT, valid in 2026 for Amsterdam and surroundings. If we also do the plastering and painting afterwards, that part falls under 9% VAT. Full price list →

Frequently asked questions

Frequently asked questions.

What does adding a socket cost?

€ 145 including 21% VAT for a single socket and € 165 for a double. That covers the outlet, back box, cable from the nearest junction box or consumer unit, chasing and making good, finishing, testing and call-out within Amsterdam.

Have several fitted in one go and the price per point drops: from six points ten percent off the total, from twelve points fifteen percent. Call-out and isolation only need to happen once.

How many sockets do I need per room?

For a modern living room eight to twelve points, a kitchen six to eight above the worktop, a bedroom five to seven and a study eight to ten including data points. 1970s homes typically have two per room, and that is why there are so many extension leads.

The practical approach: walk through your home with a notepad and note where an extension lead or power strip sits today. That is exactly your list.

At what height do the sockets go?

Standard is 30 centimetres from the floor. That works for the vacuum, but not beside a bed or at a desk — there we advise 70 centimetres so you can reach while seated. Above a worktop it becomes 110 to 120 centimetres, and a switch sits about 105 centimetres beside the door.

It costs nothing extra to set them at the right height, provided you say so before we start chasing. Moving afterwards costs € 135 plus making good.

Is chasing needed and how much dust does it make?

In plaster or plasterboard it is manageable: drill a hole and hide a cable. In solid masonry you have to chase, and that makes dust. We use extraction on the chase machine and put up dust barriers where needed, but completely dust-free does not exist.

Chasing costs € 17 per metre in brick and € 24 in concrete, plus € 14 per metre to make the chase plaster-ready. For a single point in an awkward place neat trunking is sometimes wiser — we will say so.

Can a socket go anywhere?

Almost anywhere, but not in bathroom zones: in zones 0, 1 and 2 an ordinary socket is not allowed. Outside the zones it is fine, provided the circuit is protected by a 30 mA RCD.

Also: the circuit we tap into must handle the extra load. If it is already busy, we would rather add a circuit (€ 265) than hang a tenth point on a circuit that trips at the first vacuum.

How long does it take?

Three-quarters of an hour to an hour per point in a typical home, less if several points share the same cable run. A list of eight to ten points through the whole house is usually one working day.

You are only without power on the circuits we work on, and then only briefly. In practice you notice little besides the noise and the dust.

Do you add sockets for English-speaking clients in Amsterdam?

Yes. Adding a single socket costs € 145 including 21% VAT, a double € 165 — covering the outlet, the back box, the cable run, chasing and making good, finishing, testing and the call-out within Amsterdam.

The rate drops with volume: ten percent off from six points, fifteen percent from twelve, because the call-out and isolation only happen once. Walk through your home and note where an extension lead currently sits — that is your list.

Callback request · 30 seconds

Request a callback — pick a time that suits you and we call within that window.

Walk through your home and note where an extension lead sits now — that is your list. Call that through to us and we have a price within a day.

01

Within 4 hours on weekdays

If you choose “as soon as possible”, we call within four hours during office hours. Outside those hours, the next morning.

02

An electrician, not a call centre

You speak to someone who does the work and can already say on the phone what is going on and roughly what it costs.

03

Dutch, English, Russian or Ukrainian

Tell us which language you prefer and we will make sure the right colleague calls.

04

No cost, no obligation

The home survey is free too, with no call-out fee. You are not committed to anything.

Faster: send a photo of your meter cupboard now

One photo of the open meter cupboard tells us more than ten minutes on the phone. We look at it free of charge and say honestly whether anything needs doing — even if the answer is “no”.

Send photo via WhatsApp
All Reviews 5.0google logoGoogle 5.0
Overall Rating
5.0 8 reviews